E6000 Multi-Purpose Adhesive

♦ Ask us a question ♦

E6000 is formulated to meet high performance industrial requirements. The self-leveling formula forms a powerful bond with most any material and will remain flexible once cured. E6000 Industrial will handle just about any project DIYers or PROs throw at it!

Tough – 2X stronger and 60X more flex than Polyurethane!
Non-flammable once cured
Chemical resistant – safe for applications exposed to dilute acids and dilute caustics
Waterproof
Washer/Dryer safe
Paintable – paint to match surrounding area to make UV-resistant
Temperature resistant – unaffected by extreme heat or cold once cured
Flexible – excellent for bonding items subject to vibration

Read directions and test small area before use.
Surface should be clean, dry and free of dirt. For best results, lightly roughen surface before use.
TUBE: Puncture inner seal using pointer cap (if tube has a foil seal). CARTRIDGE: Trim end of nozzle. Puncture inner seal. Ideal application temperature range is 50 to 90 °F (10 to 32 °C). However, fully cured adhesive can withstand temperatures from -40 to 180 °F (-40 to 82 °C) intermittently.
Apply directly to surfaces to be bonded or repaired.
Allow 24 hours for curing–Maximum bond strength may not be reached for up to 72 hours.
TUBE: For future easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap. CARTRIDGE: For prolonged storage after opening, cover or plug the opening of the nozzle.
Clean uncured adhesive with acetone or citrus-based solvents.
Product is paintable and immediately resistant to precipitation upon application.

Note: May damage finished surfaces. Avoid such contact until completely dry. Not recommended for use on polystyrene, polyethylene, polypropylene, Styrofoam™ or paper products.

Includes 1 - 3.7 oz tube and screw-on application tip