Crystal CerA Wax Resist
Crystal CeraA Wax Resist is applied to the base and rims of the pieces before glazing.
To use:
Pour a small amount in a separate container, use as desired, and dispose of the excess. DO NOT pour used wax back into the original container. You may thin the wax resist to suit your use. Allow the wax to dry for 3 to 4 hours before glazing or adding a second coat.
Some clean up with a sponge may be required. Clean up is easy with warm, soapy water. To help with the cleaning of brushes, before using your brush with the Wax Resist, dip your brush in liquid soap and wipe off the excess. This will protect your brush and make clean up a breeze. Be sure to fire to at least cone 017. You must have red heat or re-fire bisque at cone 06.
Pour a small amount in a separate container, use as desired, and dispose of the excess. DO NOT pour used wax back into the original container. You may thin the wax resist to suit your use. Allow the wax to dry for 3 to 4 hours before glazing or adding a second coat.
Some clean up with a sponge may be required. Clean up is easy with warm, soapy water. To help with the cleaning of brushes, before using your brush with the Wax Resist, dip your brush in liquid soap and wipe off the excess. This will protect your brush and make clean up a breeze. Be sure to fire to at least cone 017. You must have red heat or re-fire bisque at cone 06.
Note:
Wax Resist has a shelf life of two to three years. Always keep the lid tight on the original container. If used improperly Wax Resist can become contaminated, if the wax has a strong sour odor it is contaminated.
Available in 500 ml, 1 liter & 4 liter quantities.
Note: Wax will freeze in cold climates and will not resist effectively. If the wax has frozen, it will get lumpy and separate. Wax resist will be sent to cold regions in the winter only at the customer’s risk.